Water jet cutting is a profoundly important method of using pressurized water to cut a wide variety of materials. From soft materials like wood to incredibly hard materials like concrete, metal or stone, water jet cutting in San Francisco, CA is used across a wide variety of industries!
The practice is simple. Intensifiers or direct drive pumps are used to pressurize water to a desired level. The pressurized flow is then pushed through a nozzle that focuses the intense burst on whatever needs to be cut. Often, for softer items, the velocity of the water jet itself is enough to cut the material, however for some harder materials an abrasive is added to the mixture, using high pressure erosion to help expedite the process.
Water jetting is versatile, making it practical for just about any coordinated cutting project. Using hydraulic adjustments and different pressure nozzles, water jetting can be conducted at different speeds, pressures and angles, making it supremely accurate and exceptionally effective. But accuracy isn’t the only reason water jet cutting is so widely used.
Why is it so effective?
The reasons water jet cutting is so important are numerous. First and foremost, it’s natural—meaning there are no chemicals or byproducts that might be harmful to the environment: just water! Even if abrasives are used in the water jetting process—like garnet or sand—they’re still natural materials that won’t cause harm to the environment.
Water jetting is also very inexpensive, as compared to more abrasive cutting operations. Other than the hydraulic equipment used to pressurize the water, there’s very little cost in obtaining materials for effective cutting—after all, water is pretty accessible!
Finally, the sheer number of applications for water jet cutting make it viable. It’s not hard to find an experienced water jet cutter because it’s a widely recognized service these days. To this end, having precise cuts made to your project is easier than finding someone with the specialized equipment and knowledge required to deliver.
Facts about water jet cutting
- Most water jets operate at range of 30,000 to 90,000 psi, depending on the application.
- Cuts as accurate as .005 inches can be made with a water jet cutter!
- Water used during the jetting process is usually safe enough to dump down the drain!
- Water jetting can be used to produce complex 3D shapes.
- Water jetting doesn’t produce any smoke, fumes, dust or other airborne contaminants.
As is evidenced by the facts above, water jet cutting in San Francisco, CA is truly an amazing process and one that’s receiving a lot of well deserved attention from industries of all types with cutting needs.
What’s not to love?
Without the risk of contaminants being produced, without the need for expensive variables, and without any hazardous situations, water jet cutting is becoming a staple across industries for precision cutting. To learn more about water jetting or to inquire about having the process done for you, contact the experts at Mach 1 Waterjet, Inc. today!